Pick out the correct statement?

Process Equipment and Plant Design 03/04/2021

A. It is preferred to use a vertical condenser for condensation of vapor from a distillation column without sub-cooling
B. Draining of residual liquid on tray during shut down of distillation column is facilitated by weep holes
C. Random packing a packed tower offers the advantage of lower pressure drop and higher throughput of fluids as compared to regular/stacked packing
D. Risers are generally not connected to the plate in a distillation coloumn by bolts, rivets or welding

Related Mcqs:

    The longitudinal stress induced in a thin walled cylindrical vessel under internal pressure is_________________?
    A. pd/2t B. pd/4t C. pd/t D. pd/8t...
    In a _____________ riveted joint, the number of rivets decreases from the innermost row to the outermost row?
    A. Chain B. Diamond C. Zig-zag D. None of these...
    Cooling water fouling factors vary in the range of 0.001 to 0.003____________________?
    A. (BTU/hr.ft2. °F)-1 B. (kcal/hr.m2.°C)-1 C. (W/m2.°K)-1 D. (kcal/hr. m. °C)-1...
    Triangular pitch tube layout as compared to square pitch in a shell and tube heat exchanger________________?
    A. Permits the use of less tubes in a given shell diameter B. Facilitates comparatively easier external cleaning because of large clearance C. Permits the use of more tubes in a given shell diameter D. Both B. and C....
    Smoker’s equation for the calculation of number of equilibrium stages in a continuous binary distillation column is used, when the_________________?
    A. Relative volatility is close to one (e.g., separation of close boiling isomers) B. Feed is not at its bubble point C. Number of equilibrium stages in only stripping section is to be calculated D. Number of equilibrium stages required is likely to be very small...

Leave a Reply

Your email address will not be published. Required fields are marked *