The longitudinal stress induced in a thin walled cylindrical vessel under internal pressure is_________________?

Related Mcqs:

(Le/D) for a Tee (used as elbow, entering run) would be around _______________________?

A. 5 B. 60 C. 160 D. 200...

The buckling tendency of compression members is always in the direction of the _____________________?

A. Least radius of gyration B. Axis of the load C. Perpendicular to the axis of the load D. None of these...

Pick out the wrong statement pertaining to the design of a long tube vertical evaporator ?

A. Tube dia is 3-6 cms, while tube length in 3-6 metres B. Steam is fed to the shell, whereas the liquor is filled inside the tube C. Liquor level is maintained at 1/3rd to 1/2 of the height of the tube D. None of these...

The type of stress developed in a metallic bar on subjecting it to a change in temperature without allowing it to be deformed is ______________ stress?

A. Shear B. Tensile C. Compressive D. Thermal...

In the design of a shell and tube heat exchanger, the corrosion allowance ____________________?

A. Need not be provided for non-pressure parts like tie rods, spacers, baffles, supports etc. B. For carbon steel and cast iron pressure parts is 1.5 mm (except for tubes) and for severe conditions it is 3 mm C. For internal cover and tube sheet is provided on both the sides D. All A., B. … In the design of a shell and tube heat exchanger, the corrosion allowance ____________________?Read More...