A tap bolt_____________________?

Machine Design 20/06/2020

A. has a head on one end and a nut fitted to the other
B. has head at one end and other end fits into a tapped hole in the other part o be joined
C. has both the ends threaded
D. has pointed threads
E. requires locking devices

Related Mcqs:

    The property of a material which enables it to resist fracture due to high impact loads is known as__________________?
    A. elasticity B. endurance C. strength D. toughness E. resilience...
    The fatigue limit of a material____________________?
    A. is greatly decreased by poor surface conditions B. remains same irrespective of surface conditions C. depends mainly on core composition D. is dependent upon yield strength of material E. none of the above...
    The deflection of a cantilever beam under load W is 8. If its width is halved, then the deflection under load W will be________________?
    A. 28 B. 8/2 C. 48 D. 8/4 E. none of the above...
    Spring stiffness is__________________?
    A. ratio of coil diameter to wire diameter B. load required to produce unit deflection C. its capability of storing energy D. its ability to absorb shocks E. none of the above...
    If threads on a bolt are left hand, threads on nut will be_____________________?
    A. right hand with same pitch B. left hand with same pitch C. could be left or right hand D. right hand with fine pitch E. left hand with fine pitch...

Leave a Reply

Your email address will not be published. Required fields are marked *