Search
.Management Sciences
Category: Civil Engineering Mcqs
Which of the following conditions is to be satisfied both in elastic and plastic analysis ?
A. equilibrium condition
B. yield condition
C. plastic moment condition
D. mechanism condition
The pitch of the main bars in a simply supported slab, should not exceed its effective depth by_____________?
A. Three times
B. Four times
C. Five times
D. Six times
Pick up the correct statement from the following?
A. The ratio of the up flux and down flux just above the snow surface, is called albedo
B. Spectral albedo of snow is calculated for the semi-infinite snow thickness
C. Water equivalent height of snow is the height of water column obtained by melting snow
D. All of these
If there are two canals taking off from each flank of a river, then there will be____________________?
A. one divide wall and one undersluice
B. one divide wall and two undersluices
C. two divide walls and one undersluice
D. two divide walls and two undersluices
By providing sufficient edge distance, which of the following failures of riveted joint can be avoided ?
A. tension failure of the plate
B. shear failure of the rivet
C. shear failure of the plate
D. crushing failure of the rivet
In the time-cost optimisation, using CPM method for network analysis, the crashing of the activities along the critical path is done starting with the activity having________________?
A. longest duration
B. highest cost slope
C. least cost slope
D. shortest duration
The moment-curvature relation at a plastic hinge is________________?
A. linear
B. parabolic
C. constant moment for all curvatures
D. constant curvature for all moments
A four wheel trac*or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be___________________?
A. 20 kg/tonne
B. 30 kg/tonne
C. 40 kg/tonne
D. 50 kg/tonne
The shape factor of an isosceles triangle for bending about the axis parallel to the base is________________?
A. 1.5
B. 1.7
C. 2.0
D. 2.34
Recent Comments