The moment-curvature relation at a plastic hinge is________________?

Related Mcqs:

By providing sufficient edge distance, which of the following failures of riveted joint can be avoided ?

A. tension failure of the plate B. shear failure of the rivet C. shear failure of the plate D. crushing failure of the rivet...

Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?

A. 10° to 30° B. 30° to 40° C. 40° to 70° D. 90°...

The bracing between two columns of a steel tank will be designed to resist_________________?

A. horizontal shear due to wind or earthquake only B. horizontal, shear due to wind or earthquake + 2.5% of column loads C. column loads + 2.5% of horizontal shear due to wind or earthquake D. column loads + full horizontal shear due to wind or earthquake...

The connection of intermediate vertical stiffeners to the web, not subjected to external loads, shall be designed for a minimum shear force (kN/m) of___________________?

A. 75 t2/h B. 125 t3/h2 C. 125 t2/h D. 175 t2/h where, t = the web thickness in mm h = the outstand of stiffener in mm...

The basic wind speed is specified at a height ‘h’ above mean ground level in an open terrain. The value of’h’ is__________________?

A. 10 m B. 20 m C. 25 m D. 50 m...