The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called_________________?

Related Mcqs:

Lapped splices in tensile reinforcement are generally not used for bars of size larger than______________?

A. 18 mm diameter B. 24 mm diameter C. 30 mm diameter D. 36 mm diameter...

If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a__________________?

A. Simply supported beam B. Continuous beam C. Cantilever beam D. None of these...

If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as___________________?

A. wl²/4 B. wl²/8 C. wl²/10 D. wl²/12...

intensity of pressure at a depth h on a block of earth weighing w per unit If p1 is the vertical______________?

A. wh (1 – cos )/(1 + ) p2 is B. wh (1 – sin )/(1 + ) ) C. wh (1 – tan )/(1 + D. w (1 – cos )/h (1 + sin )...

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?

A. 14 cm 2 B. 15 cm2 C. 16 cm2 D. 17 cm2...