A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?

Related Mcqs:

Minimum spacing between horizontal parallel reinforcement of the same size should not be less than________________?

A. One diameter B. 2.5 diameters C. 3 diameters D. 3.5 diameters...

The minimum clear cover for R.C.C. columns shall be_________________?

A. Greater of 40 mm or diameter B. Smaller of 40 mm or diameter C. Greater of 25 mm or diameter D. Smaller of 25 mm or diameter...

Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds_____________?

A. 50 cm B. 75 cm C. 100 cm D. 120 cm...

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?

A. 20 cm B. 25 cm C. 30 cm D. 35 cm...

If the size of a column is reduced above the floor, the main bars of the columns, are_____________?

A. Continued up B. Bent inward at the floor level C. Stopped just below the floor level and separate lap bars provided D. All the above...