Search
.Management Sciences
A. 1 in 5
B. 1 in 10
C. 1 in 24
D. 1 in 40
E. 1 in 50
Related Mcqs:
- Endurance limit or fatigue limit is the maximum stress that a member can withstand for an infinite number of load applications without failure when subjected to________________?
- A. dynamic loading B. static loading C. combined static and dynamic loading D. completely reversed loading E. all of the above...
- For steel, the ultimate strength in shear as compared to ultimate strength in tension is ___________________?
- A. same B. 1/2 C. 1/3 D. 1/4 E. 2/3...
- Taper on the cotter and slot is provided_________________?
- A. on both the sides B. on one side only C. on none of the sides D. may be provided anywhere E. none of the above...
- If shearing stress in nut is half the tensile stress in a bolt, then nut length should be equal to___________________?
- A. diameter of bolt B. 0.75 x diameter of bolt C. 1.25 x diameter of bolt D. 1.5 x diameter of bolt E. 0.5 x diameter of bolt...
- The designation M 33 x 2 of a bolt means___________________?
- A. metric threads of 33 nos in 2 cm. B. metric threads with cross-section of 33 mm C. metric threads of 33 mm outside diameter and 2 mm pitch D. bolt of 33 mm nominal diameter having 2 threads per cm E. none of the above...
Recent Comments