A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be________________?

Related Mcqs:

The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidly EI, is_________________?

A. wl3/3EI B. wl4/3EI C. wl4/8EI D. wl4/12EI...

In plastic analysis, the shape factor for rectangular section, is________________?

A. 1.4 B. 1.5 C. 1.6 D. 1.7...

d constant, the width of a cantilever of length l of uniform strength loaded with Keeping the depth a uniformly distributed load w varies from zero at the free end and________________?

A. (2w/ × l² at the fixed end B. (3w/ × l² at the fixed end C. (3w/ × l² at the fixed end D. (5w/ × l² at the fixed end...

The stiffness of the close coil helical spring is_________________?

A. d4N/8D3n B. d4N/4D3n C. 4D3N/d4n D. 8D3N/d4n...

Co-efficient of wind resistance of a circular surface, is________________?

A. 1/2 B. 1/3 C. 2/3 D. 3/2...