Search
.Management Sciences
A. lacing
B. battening
C. tie plates
D. perforated cover plates
Related Mcqs:
- In a gusseted base, when the end of the column is machined for complete bearing on the base plate, then the axial load is assumed to be transferred to base plate__________________?
- A. fully by direct bearing B. fully through fastenings C. 50% by direct bearing and 50% through fastenings D. 75% by direct bearing and 25% through fastenings...
- The use of tie plates in laced columns is_________________?
- A. prohibited B. not prohibited C. permitted at start and end of lacing system only D. permitted between two parts of the lacing...
- Area of openings for buildings of large permeability is more than_________________?
- A. 10% of wall area B. 20% of wall area C. 30% of wall area D. 50% of wall area...
- Pitch of tacking rivets, when double angles connected back to back and acting as tension members should not be more than_________________?
- A. 500 mm B. 600 mm C. 1000 mm D. 300 mm...
- The diameter of base of conical flare of a steel stack is_____________________?
- A. less than d B. equal to d C. more than d D. any of the above where d is the diameter of the cylindrical part...
Recent Comments