Bending compressive and tensile stresses respectively are calculated based on_________________?

Related Mcqs:

By providing sufficient edge distance, which of the following failures of riveted joint can be avoided ?

A. tension failure of the plate B. shear failure of the rivet C. shear failure of the plate D. crushing failure of the rivet...

Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?

A. 10° to 30° B. 30° to 40° C. 40° to 70° D. 90°...

Maximum pitch of rivets, used in steel stacks, is limited to_______________?

A. 6t B. 101 C. 121 D. 161 where t is thickness of thinner plate being connected...

The connection of intermediate vertical stiffeners to the web, not subjected to external loads, shall be designed for a minimum shear force (kN/m) of___________________?

A. 75 t2/h B. 125 t3/h2 C. 125 t2/h D. 175 t2/h where, t = the web thickness in mm h = the outstand of stiffener in mm...

Steel tanks are mainly designed for_______________________?

A. weight of tank B. wind pressure C. water pressure D. earthquake forces...