Pick out the wrong statement pertaining to shell and tube heat exchanger_______________?

Process Equipment and Plant Design 10/01/2022

A. Clearance between shell & baffles and between tube & baffles should be minimum to avoid
by-passing of the fluid, but it should be enough to permit the removal of tube bundle
B. Baffles are supported independently of the tubes by tie rods and positioned by spacers
C. Tie rods are fixed at one end in the tube sheet by making blind holes and the minimum
number of tie rods is 4 with at least 10 mm diameter
D. Bracket supports are used for horizontal shell, while saddle support is used for vertical shell

Related Mcqs:

    The longitudinal stress induced in a thin walled cylindrical vessel under internal pressure is_________________?
    A. pd/2t B. pd/4t C. pd/t D. pd/8t...
    In case of saddle packing (e.g., berl and intralox saddles), the maximum size of the packing should not exceed ______________ of the column diameter?
    A. 1/5th B. 1/15th C. 1/30th D. 1/50th...
    In a rotary drier, the average retention time of solid is (where Z = length of the drier, metres ρ = apparent solid density, kg/m3 L = flow rate of dry solids, kg/see. m2 drier crosssection H = hold up of solid.) ?
    A. Z.H.ρ/L B. L/Z.H.ρ C. H.ρ/L D. Z.H/ρL...
    With increase in pressure drop (for a given particle size), the dust collection efficiency of a cyclone separator will________________?
    A. Increase B. Decrease C. Remain unaffected D. Increase or decrease depending on the nature of the dust...
    In packed towers provided with saddle packing, liquid redistributors are positioned at every _______________ times column diameter or 6 metres whichever is less?
    A. 2-3 B. 5-8 C. 10-15 D. 20-25...

Leave a Reply

Your email address will not be published. Required fields are marked *