Bubble cap tray is the most commonly used tray in large distillation column, because______________?

Process Equipment and Plant Design 30/12/2022

A. Of its flexibility and nearly constant efficiency under varying conditions of operation
B. It incurs less pressure drop as compared to any other try designed for the same duty
C. It eliminates the foaming and entrainment tendency during operation
D. None of these

Related Mcqs:

    For turbulent flow (NRe > 2100) of low viscosity fluid (μ > 20cp) in steel pipes, the optimum inside pipe diameter is given by(where, Q = fluid flow rate, ft3/sec, ρ = fluid density, lb/ft3 μ = fluid viscosity, centipoise Di = optimum inside pipe diameter, inches) ?
    A. Di, opt = 3.9 Q0.45 ρ0.13 B. Di, opt = 3.9 Q0.45. μ0.95 C. Di, opt = 4.7 Q0.36. μ3.2ρ0.13 D. Di, opt = 3 Q0.36. μ0.88...
    Frame thickness in the plate and frame filter press is normally in the range of ______________ inches?
    A. 0.25 to 4 B. 0.25 to 8 C. 1 to 5 D. 1 to 12...
    Lug support is meant for supporting _______________ vessels?
    A. Large horizontal cylindrical B. Tall but empty C. Small D. Thick walled tall...
    In sieve plate column, holes are drilled or punched in sizes ranging from 2.5 to 12 mm (5 mm being widely used). The hole pitch is normally ______________ times the hole diameter to give the required hole area?
    A. 0.5 to 1.5 B. 2.5 to 4.0 C. 5 to 10 D. 10 to 15...
    In shell and tube heat exchangers, straight tie rods are used to_________________?
    A. Hold baffle in space B. Fix the tubes in position C. Account for thermal strain D. None of these...

Leave a Reply

Your email address will not be published. Required fields are marked *