All moisture in a non-hygroscopic material is the ________________ moisture?

Related Mcqs:

Absorption factor is defined as (where, S1 = slope of the operating line S2 = slope of the equilibrium curve) ____________________?

A. S2/S1 B. S1/S2 C. S1 – S2 D. S1 × S2...

In a moderately sized packed absorption tower, channelling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter ?

A. > 4 :1 B. < 8 : 1 C. > 8:1 D. < 6:1...

A packed tower compared to a plate tower for a particular mass transfer operation__________________?

A. Incurs smaller pressure drop B. Allows installation of cooling coils C. Is less costly when built in large sizes/diameters D. Is more suitable, if suspended solids are present in fluid streams...

An example of elution is______________________?

A. Separation of uranium oxide from its ore by H2SO4 in a Pachuca tank B. Separation of sugar from sugar beet by hot water C. Dissolution of tannin out of tree barks by water D. Recovery of vegetable oils from seeds...

Make up water is supplied during cooling tower operation to compensate for water losses due to______________________?

A. Evaporation B. Blowdown C. Entrainment D. All A., B. & C....