Search
.Management Sciences
A. metric threads of 33 nos in 2 cm.
B. metric threads with cross-section of 33 mm
C. metric threads of 33 mm outside diameter and 2 mm pitch
D. bolt of 33 mm nominal diameter having 2 threads per cm
E. none of the above
Related Mcqs:
- Stress concentration in static loading is_________________?
- Which is correct statement ? A. very serious in brittle materials and less serious in ductile materials B. very serious in ductile materials and less serious in brittle materials C. equally serious in both types of materials D. seriousness would depend on other factors E. none of the above...
- The ratio of endurance limit in shear to the endurance limit in flexure is__________________________?
- A. 0.33 B. 0.4 C. 0.5 D. 0.55 E. 0.6...
- A bolt___________________?
- A. has a head on one end and a nut fitted to the other B. has head at one end and other end fits into a tapped hole in the other part to be joined C. has both the ends threaded D. is provided with pointed threads E. requires no nut...
- In oilness bearings________________?
- A. the oil film pressure is generated only by the rotation of the journal B. the oil film is maintained by supplying oil under pressure C. do not require external supply of lubricant D. grease required to be applied after some intervals E. none of the above...
- If the tearing efficiency of a riveted joint is 75%, then the ratio of diameter of rivet to the pitch is equal to___________________?
- A. 0.2 B. 0.25 C. 0.50 D. 0.6 E. 0.75...
Recent Comments