If the 20 mm rivets are used in lacing bars, then the minimum width of lacing bar should be______________?

Related Mcqs:

If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be__________________?

A. 16 mm B. 20 mm C. 24 mm D. 27 mm...

Bearing stiffener in a plate girder is used to__________________?

A. transfer the load from the top flange to the bottom one B. prevent buckling of web C. decrease the effective depth of web D. prevent excessive deflection...

The bracing between two columns of a steel tank will be designed to resist_________________?

A. horizontal shear due to wind or earthquake only B. horizontal, shear due to wind or earthquake + 2.5% of column loads C. column loads + 2.5% of horizontal shear due to wind or earthquake D. column loads + full horizontal shear due to wind or earthquake...

The moment-curvature relation at a plastic hinge is________________?

A. linear B. parabolic C. constant moment for all curvatures D. constant curvature for all moments...

Intermediate vertical stiffeners in a plate girder need be provided if the depth of web exceeds___________________?

A. 501 B. 851 C. 200 t D. 2501 where t is thickness of web...