Search
.Management Sciences
A. after passing through the condenser
B. before passing through the condenser
C. after passing through the expansion or throttle valve
D. before entering the expansion valve
E. before entering the compressor
Related Mcqs:
- In vapor compression cycle, the condition of refrigerant is high pressure saturated liquid________________?
- A. after passing through the condenser B. before passing through the condenser C. after passing through the expansion or thiottle valve D. before entering the expansion valve E. before entering the compressor...
- Ammonia-absorption refrigeration cycle requires__________________?
- A. very little work input B. maximum work input C. nearly same work input as for vapour compression cycle D. zero work input E. none of the above...
- In refrigerators, the temperature difference between the evaporating refrigerant and the medium being cooled should be_________________?
- A. high, of the order of 25° B. as low as possible (3 to 11°C) C. zero D. any value E. none of the above...
- Freon group of refrigerants are___________________?
- A. inflammable D. toxic C. non-inflammable and toxic D. non-toxic and inflammable E. non-toxic and non-inflammable...
- For proper refrigeration in a cabinet, if the temperature and vapour pressure difference between cabinet and atmosphere is high, then_________________?
- A. bigger cabinet should be used B. smaller cabinet should be used C. perfectly tight vapour seal should be used D. refrigerant with lower evaporation temperature should be used E. refrigerant with high boiling point must be used...
Recent Comments