Search
.Management Sciences
Category: Civil Engineering Mcqs
The drainage water intercepting the canal can be disposed of by passing the canal below the drainage in___________________?
A. aqueduct and syphon aqueduct
B. aqueduct and super passage
C. super passage and canal syphon
D. level crossing
Hume steel pipes are__________________?
A. Steel pipes
B. Steel shell coated from inside with cement mortar
C. Steel shell coated from outside with cement mortar
D. Both B. and C.
is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?
A. f = (P/A) + (Z/M)
B. f = (A/P) + (M/Z)
C. f = (P/A) + (M/Z)
D. f = (P/A) + (M/6Z)
The grade resistance factor for an earth moving machine can be obtained by multiplying grade percentage by a factor approximately equal to_________________?
A. 2 kg/tonne
B. 6 kg/tonne
C. 9 kg/tonne
D. 20 kg/tonne
Sewerage system is designed for_______________?
A. maximum flow only
B. minimum flow only
C. average flow only
D. maximum and minimum flow
The Saudi Arabian Oil Refinery developed an oil well which is estimated to contain 5,000,000 barrels of oil at an initial cost of $ 50,000,000. What is the depletion charge during the year where it produces half million barrels of oil? Use Unit or Factor method in computing depletion?
A. $ 5,000,000.00
B. $ 5,010,000.00
C. $ 5,025,000.00
D. $ 5,050,000.00
Sewer manholes are generally provided at________________?
A. The change of gradient
B. The change of direction
C. The junctions of sewers
D. All of these
The suitable method of forecasting popu¬lation for a young and rapidly increasing city is_________________?
A. arithmetical increase method
B. geometrical increase method
C. incremental increase method
D. graphical method
A single force and a couple acting in the same plane upon a rigid body________________?
A. balance each other
B. cannot balance each other
C. produce moment of a couple
D. are equivalent
E. none of the above
The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is___________________?
A. 30°
B. 40°
C. 45°
D. All the above
Recent Comments