Search
.Management Sciences
Category: Airport Engineering
Runway threshold is indicated by a series of parallel lines starting from a distance of_______________?
A. 3 m from runway end
B. 6 m from runway end
C. 10 m from runway end
D. 15m from runway end
Consider the following statements: Wind rose diagram is used for the purposes of_________________?
1. runway orientation
2. estimating the runway capacity
3. geometric design of holding apron
select the correct answer?
A. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1 alone is correct
The size of landing area for multiengined helicopters operating under 1FR conditions is______________?
A. 22.5 m x 22.5 m
B. 30 m x 30 m
C. 22.5 m x 30 m
D. 60 mx 120 m
The cruising speed of the aircraft is 500 kmph. If there is a head wind of 50 kmph, then the air speed and ground speed of the aircraft respectively will be_________________?
A. 450 kmph and 500 kmph
B. 500 kmph and 450 kmph
C. 450 kmph and 450 kmph
D. 500 kmph and 500 kmph
The engine failure case for determining the basic runway length may require________________?
A. only clearway
B. only stop way ,
C. either a clearway or a stopway
D. either a clearway or a stopway or both
Assertion A : Airport capacity during IFR conditions is usually less than that during VFR conditions. Reason R: During clear weather condition (VFR), the aircrafts on final approach to runway can be spaced closer during poor visibility conditions?
Select your answer based on the coding system given below?
A. Both A and R are true and R is the correct explanation of A
B. Both A and R are true but R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true
The slope of the transitional surface for A, B and C type of runway shall be_______________?
A. 1:5
B. 1:7
C. 1:10
D. 1:12
Maximum gross take-off weight of an aircraft is__________________?
A. equal to the maximum structural landing weight
B. less than the maximum structural landing weight
C. more than the maximum structural landing weight
D. equal to the empty operating weight plus the payload
As per ICAO, the minimum basic runway length for A and E type of airport will be________________?
A. 1500 m and 600 m
B. 2100 m and 750 m
C. 1500 m and 750 m
D. 2100 m and 600 m
Recent Comments