Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by_________________?

Related Mcqs:

The maximum permissible size of aggregates to be used in casting the ribs of a slab, is______________?

A. 5 mm B. 7.5 mm C. 10 mm D. 15 mm...

If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be_______________?

A. Straight below centroidal axis B. Parabolic with convexity downward C. Parabolic with convexity upward D. Straight above centroidal axis...

A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?

A. 20 cm B. 25 cm C. 30 cm D. 35 cm...

If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than____________________?

A. 4 mm B. 5 mm C. 6 mm D. 8 mm...

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?

A. 37 cm B. 38 cm C. 39 cm D. 40 cm...