Search
.Management Sciences
A. Its dimensions are not decided from the diagonal tensile stress
B. Large size of long beams carrying large shear force need not be adopted
C. Removal of cracks in the members due to shrinkage
D. All the above
Related Mcqs:
- The load stress of a section can be reduced by______________?
- A. Decreasing the lever arm B. Increasing the total perimeter of bars C. Replacing larger bars by greater number of small bars D. Replacing smaller bars by greater number of greater bars...
- The spacing of transverse reinforcement of column is decided by the following consideration_______________?
- A. The least lateral dimension of the column B. Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column C. Forty-eight times the diameter of transverse reinforcement D. All the above...
- If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be_______________?
- A. Straight below centroidal axis B. Parabolic with convexity downward C. Parabolic with convexity upward D. Straight above centroidal axis...
- An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is__________________?
- A. 300 cm B. 233 cm C. 176 cm D. 236 cm...
- An R.C.C. column is treated as long if its slenderness ratio is greater than____________?
- A. 30 B. 35 C. 40 D. 50...
Recent Comments