Search
.Management Sciences
A. decrease in h/t ratio
B. increase in h/t ratio
C. decrease in thickness
D. increase in height
where ‘h’ is height and t is thickness
Related Mcqs:
- When the axis of load lies in the plane of rivet group, then the rivets are subjected to________________?
- A. only shear stresses B. only tensile stresses C. both (A) and (B) D. none of the above...
- According to IS Specifications, the maximum pitch of rivets in compression is_____________________?
- A. lesser of 200 mm and 12 t B. lesser of 200 mm and 161 C. lesser of 300 mm and 32 t D. lesser of 3 00 mm and 24 t where t is thickness of thinnest outside plate or angle...
- As per IS : 800, for compression flange, the outstand of flange plates should not exceed________________?
- A. 121 B. 161 C. 201 D. 251 where t = thickness of thinnest flange plate...
- If the floor is supported at or near the bottom but top chords of a bridge are not braced, then the bridge is called________________?
- A. deck type B. through type C. half through type D. double deck type...
- The shape factor of an isosceles triangle for bending about the axis parallel to the base is________________?
- A. 1.5 B. 1.7 C. 2.0 D. 2.34...
Recent Comments