Search
.Management Sciences
A. Strain
B. Stress
C. Modular ratio
D. None of these
Related Mcqs:
- The minimum baffle height should be ______________?
- A. Equal to the impeller diameter B. Twice the impeller diameter C. Twice the tank diameter D. 3/4 of the tank height...
- Frame thickness in the plate and frame filter press is normally in the range of ______________ inches?
- A. 0.25 to 4 B. 0.25 to 8 C. 1 to 5 D. 1 to 12...
- Pick out the wrong statement ?
- A. Plate efficiency increases with increase in superficial vapour velocity till entrainment limit B. Increase in depth of the liquid about the slots increases the plate efficiency, particularly if the liquid depth is < 1" C. Too small a plate spacing can cause a low efficiency, if the vapour velocity is greater than the allowable … Pick out the wrong statement ?Read More...
- Normally, the ratio of the total riser area to the tower cross sectional area (for bubble cap towers of diameter more than 3 ft) is around_______________?
- A. 0.4-0.6 B. 0.35-0.75 C. 0.1-0.2 D. 0.55-0.85...
- Of the pressure vessels, with same thickness but different diameters, which one withstands higher pressure ?
- A. Larger dia vessel B. Smaller dia vessel C. Larger dia long vessel D. Strength of the vessel is same irrespective of the diameter...
Recent Comments