For a cylindrical vessel of moderate height, the weld joint efficiency for joints parallel to the cylindrical axis is given as 1.0; while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylindrical vessel, what value of weld joint efficiency should be used ?

Related Mcqs:

1.2 to 3.8 cms is the value of the ______________________?

A. Downcomer liquid seal in case of a balanced tray design B. Static submergence in case of a bubble cap tray for column operating under pressure (≥ 1 atm) C. Skirt clearance for bubble caps D. All A., B. and C....

A binary liquid Azeotropic mixture has boiling point lower than either of the components, when it shows _____________ deviation from Raoult’s Law?

A. Positive B. Negative C. No D. None of these...

Cooling water fouling factors vary in the range of 0.001 to 0.003____________________?

A. (BTU/hr.ft2. °F)-1 B. (kcal/hr.m2.°C)-1 C. (W/m2.°K)-1 D. (kcal/hr. m. °C)-1...

To keep the power input constant for a stirred vessel operating under fully developed turbulent flow conditions (constant power number), if the impeller diameter is increased by 20%, the impeller speed should be decreased by a factor of_________________?

A. (1.2)3/2 B. (1.2)3/5 C. (1.2)2/3 D. (1.2)5/3...

In actual operation of a bubble cap distillation tower, the ______________ at the bottom of the tower is more than that at the top of the tower?

A. Molal flow rate of vapour B. Vapour molecular weight C. Pressure and temperature D. All A., B. and C....