A forced circulation long tube vertical evaporator as compared to the natural circulation evaporator__________________?

Process Equipment and Plant Design 01/05/2021

A. Is economical in operation
B. Employs high velocity, high heat transfer rate and less heating surface requirement
C. Employs a centrifugal pump placed between external downtake from vapor drum and inlet to
tube bundle
D. Both B. & C.

Related Mcqs:

    Tube wall thickness depends on the corrosiveness of the fluids and their operating pressure & temperature and is specified by Birmingham wire gauge (B.W.G)-a number which varies from 8 to 18 with the numbers 14 and 16 being more commonly used. Outside diameter of tubes varies from about 15 to 50 mm; however a tube of less than _____________ mm outside diameter is generally not recommended for fouling fluids ?
    A. 16 B. 19 C. 28 D. 38...
    The minimum shell thickness for tank ≤ 15 metres diameter is limited to _______________ mm, for reasons of elastic stability?
    A. 2 B. 5 C. 10 D. 15...
    Which of the following packing materials provides for maximum mass transfer ?
    A. Raschig rings B. Raschig rings C. Cross-partition rings D. All give the same value...
    In a distillation column, minimum clearance to be maintained between the overflow weir and the last row of the bubble caps is ______________ cms?
    A. 2.5 B. 7.5 C. 15 D. 20...
    25 per cent cut segmental baffle means that the baffle__________________?
    A. Height is 75% of the I.D. of the shell B. Height is 25% of the I.D. of the shell C. Spacing is 75% of its height D. Width is 25% of its height...

Leave a Reply

Your email address will not be published. Required fields are marked *