Search
.Management Sciences
A. Clearance of 25-75 mm
B. Cap pitch of 1.3-2 times the cap diameter
C. Either A. or B.
D. Neither A. nor B.
Related Mcqs:
- The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the _______________ stress?
- A. Working B. Damaging C. Allowable D. None of these...
- A perforated plate has holes of diameter dn arranged in a pitch ph. Each hole has a tube of I.D. dt passing through it. The ligament efficiency is given by_______________?
- A. (ph – dh)/ph B. (ph – dh . dt/2)/ph C. (ph – dt)/ph D. (ph – dh)/dh...
- Rotary driers are most economically designed for the number of heat transfer units (HTU) from _________________?
- A. 0.01 to 1 B. 1.5 to 2.5 C. 5 to 10 D. 10 to 20...
- The safe distance of habitation from a hazardous chemical plant (TLV of its product < 1000 ppm) should be about ______________ kms?
- A. 1 B. 5 C. 15 D. 25...
- The wall thickness for a large high pressure pipeline is determined by the consideration of the____________________?
- A. Axial tensile stress in the pipe B. Forces exerted by static and dynamic action at bends C. Circumferential pipe-wall tension D. Temperature stresses...
Recent Comments