The LMTD correction factor (FT) is defined as the __________________?

Process Equipment and Plant Design 30/06/2021

A. Ratio of true temperature difference to the LMTD
B. Ratio of LMTD to the true temperature difference
C. Differenced of true temperature difference and the LMTD
D. Geometric mean of the true temperature difference and the LMTD

Related Mcqs:

    ______________ closure is the weakest enclosure for cylindrical vessels?
    A. Hemispherical B. Torispherical C. Conical or flat plate D. Elliptical...
    For a 25 mm hole drilled in plates to be riveted, the shank diameter of the rivet should be _______________ mm?
    A. 25 B. 23 C. 26 D. 27...
    The buckling tendency of compression members is always in the direction of the _____________________?
    A. Least radius of gyration B. Axis of the load C. Perpendicular to the axis of the load D. None of these...
    Length to diameter ratio of most rotary driers is in the range of____________________?
    A. 1 to 2 B. 4 to 10 C. 10 to 20 D. 20 to 30...
    In case of a shell and tube heat exchanger, the minimum shell thickness for carbon steel (inclusive of corrosion allowance) depends on shell diameter and is in the range of ________________ mm?
    A. 3-5 B. 5-11 C. 8-15 D. 12-18...

Leave a Reply

Your email address will not be published. Required fields are marked *