Search
.Management Sciences
A. It is unsuitable for concentrating those liquids, which form a scale or deposit salt
B. It is suitable for process, in which the final product is a liquor instead of solid
C. Its usual dimensions are: tube dia = 2-3 cms; evaporator body dia = 1-4 metres and evaporator
height = 2.5-4 metres
D. Liquor flows inside the tube, while the steam is outside submerging the tube
Related Mcqs:
- Scale up problem in design based on the similarity concept takes into account _______________ similarity?
- A. Geometrical B. Kinematic C. Dynamic D. All A., B. and C....
- In case of saddle packing (e.g., berl and intralox saddles), the maximum size of the packing should not exceed ______________ of the column diameter?
- A. 1/5th B. 1/15th C. 1/30th D. 1/50th...
- A cylindrical pressure vessel of volume 6 πm3 has to be designed to withstand a maximum internal pressure of 10 atm. The allowable design stress of the material is 125N/mm2 and corrosion allowance is 2 mm. The thickness of the vessel for a length/diameter ratio of 3 will be close to________________?
- A. 5 mm B. 6 mm C. 8 mm D. 10 mm...
- In case of a continuous distillation column, increase in reflux ratio may result in the______________?
- A. Lower fixed charges for the column B. Greater cost for the reboiler heat supply C. Greater cost for the condenser coolant D. All A., B. and C....
- The practical representative values of HETP for a number of commercial operations lies within a range of ______________ metre?
- A. 0.1-0.2 B. 0.2-0.5 C. 0.4-0.9 D. 1.2-1.5...
Recent Comments