In precombustion chamber in diesel engine________________?

I.C. Engines 27/11/2020

A. The shape and layout of the pistion crown, the inlet port, and the valve produce the turbulent effect of fuel mixture
B. Fuel is injected into an auxiliary chamber that is separated from the cylinder by an orifice or throat
C. Only a part of air charge is contained in an auxiliary chamber in which the fuel starts to burn with insufficient air which due to explosion tendency mixes thoroughly into main cylinder charge
D. There are no valves

Related Mcqs:

    All heat engines utilize_____________________?
    A. low heat value of oil B. high heat value of oil C. net claorific value of oil D. calorific value of fuel E. all of the above...
    In a typical medium speed, 4-stroke cycle diesel engine ___________________?
    A. fuelinjection starts at 10° before to dead center and ends at 20° after tor dead center B. fuel injection starts at top dead center and ends at 20° after top dead center C. fuel injection starts at just before top dead center and ends just after top deac center D. may start and end … In a typical medium speed, 4-stroke cycle diesel engine ___________________?Read More...
    Diesel fuel, compared to petrol is_________________?
    A. less difficult to ignite B. just about the same difficult to ignite C. more difficult to ignite D. highly ignitable E. none of the above...
    Pour point of fuel oil is the_________________?
    A. minimum temperature to which oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame B. temperature at which it solidifies or congeals C. it catches fire without external aid D. indicated by 90% distillation temperature i.e., when 90% of sample oil … Pour point of fuel oil is the_________________?Read More...
    Deposition of carbon in petrol engine cylinder would result in increase of__________________?
    A. clearance volume B. swept volume C. compression ratio D. volumetric efficiency E. mean effective pressure...

Leave a Reply

Your email address will not be published. Required fields are marked *