Bearing stiffeners are provided at________________?

Design of Steel Structures 12/12/2020

i) the supports
ii) the mid span
iii) the point of application of concentrated loads
The correct answer is?

A. only (i)
B. both (i) and (ii)
C. both (i) and (iii)
D. (i), (ii) and (iii)

Related Mcqs:

    Efficiency of a riveted joint, having the minimum pitch as per IS : 800, is_________________?
    A. 40% B. 50% C. 60% D. 70%...
    Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?
    A. 10° to 30° B. 30° to 40° C. 40° to 70° D. 90°...
    Maximum pitch of rivets, used in steel stacks, is limited to_______________?
    A. 6t B. 101 C. 121 D. 161 where t is thickness of thinner plate being connected...
    The connection of intermediate vertical stiffeners to the web, not subjected to external loads, shall be designed for a minimum shear force (kN/m) of___________________?
    A. 75 t2/h B. 125 t3/h2 C. 125 t2/h D. 175 t2/h where, t = the web thickness in mm h = the outstand of stiffener in mm...
    The diameter of base of conical flare of a steel stack is_____________________?
    A. less than d B. equal to d C. more than d D. any of the above where d is the diameter of the cylindrical part...

Leave a Reply

Your email address will not be published. Required fields are marked *