If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least________________?

Related Mcqs:

Minimum spacing between horizontal parallel reinforcement of the same size should not be less than________________?

A. One diameter B. 2.5 diameters C. 3 diameters D. 3.5 diameters...

The minimum clear cover for R.C.C. columns shall be_________________?

A. Greater of 40 mm or diameter B. Smaller of 40 mm or diameter C. Greater of 25 mm or diameter D. Smaller of 25 mm or diameter...

Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds_____________?

A. 50 cm B. 75 cm C. 100 cm D. 120 cm...

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?

A. f = (P/A) + (Z/M) B. f = (A/P) + (M/Z) C. f = (P/A) + (M/Z) D. f = (P/A) + (M/6Z)...

Design of R.C.C. cantilever beams, is based on the resultant force at______________?

A. Fixed end B. Free end C. Mid span D. Mid span and fixed support...