A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed_______________?

Related Mcqs:

The neutral axis of a T-beam exists_________________?

A. Within the flange B. At the bottom edge of the slab C. Below the slab D. All the above...

As per IS : 456, the reinforcement in a column should not be less than________________?

A. 0.5% and not more than 5% of cross-sectional area B. 0.6% and not more than 6% of cross-sectional area C. 0.7% and not more than 7% of cross-sectional area D. 0.8% and not more than 8% of cross-sectional area...

A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis______________?

A. Remains within the flange B. Remains below the slab C. Coincides the geometrical centre of the beam D. None of these...

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is_______________?

A. 8.3 kg/cm2 B. 7.6 kg/cm2 C. 21.5 kg/cm 2 D. 11.4 kg/cm2...

The maximum ratio of span to depth of a cantilever slab, is_______________?

A. 8 B. 10 C. 12 D. 16...