The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is______________?

Related Mcqs:

An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam________________?

A. Is safe in shear B. Is safe with stirrups C. Is safe with stirrups and inclined bars D. Needs revision of section...

The minimum thickness of a flat slab is taken_________________?

A. L/32 for end panels without drops B. L/36 for end panels without drops C. L/36 for interior panels without drop D. All the above...

Spacing of stirrups in a rectangular beam, is__________________?

A. Kept constant throughout the length B. Decreased towards the centre of the beam C. Increased at the ends D. Increased at the centre of the beam...

An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is__________________?

A. 300 cm B. 233 cm C. 176 cm D. 236 cm...

On piles, the drop must be at least_______________?

A. 80 cm B. 100 cm C. 120 cm D. 140 cm...