Search
.Management Sciences
A. Gate voltage
B. Drain voltage
C. Source voltage
D. Body voltage
Related Mcqs:
- A dc power supply has no-load voltage of 30v,and a full-load voltage of 25v at full-load current of 1A.Its output resistance & load regulation ,respectively are_____________?
- A. 5 Ω & 20 % B. 25 Ω & 20 % C. 5 Ω & 16.7 % D. 25 Ω & 16.7 %...
- A constant current signal across a parallel RLC circuits gives an o/p of 1.4v at the signal frequency of 3.89KHZ and 4.1KHZ .At the frequency of 4KHZ,the o/p voltage will be___________?
- A. 1 v B. 2v C. 1.4v D. 2.8v...
- The early effect in a bipolar junction transistor is caused by_______________?
- A. fast turn-on B. fast turn-off C. large collector-base reverse bias D. large emitter-base forward bias...
- An n- channel JFET has IDSS=2mA,and Vp=-4v.Its transconductance gm=in mA/V)for an applied gate to source voltage VGS=-2v is___________?
- A. 0.25 B. 0.5 C. 0.75 D. 1...
- An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed________?
- A. 795mV B. 395mV C. 795 mV D. 39.5mV...
Recent Comments