RCC Structures Design | Test For NTS PPSC FPSC, TEST

A. Shear force/(Leaver arm × Total perimeter of reinforcement)
B. Total perimeter of reinforcement/(Leaver arm × Shear force)
C. Leaver arm/(Shear force × Total perimeter of reinforcement)
D. Leaver arm/(Bending moment × Total perimeter of reinforcement)

Search

TopMcqs Menu

Mix Subjects Mcqs

Engineering Subjects

Management Sciences

Recent Comments

Category: RCC Structures Design

The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is______________?

A ribbed slab is provided for______________?

On piles, the drop must be at least_______________?

The diameter of longitudinal bars of a column should never be less than_____________?

Minimum spacing between horizontal parallel reinforcement of the same size should not be less than________________?

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?

The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than________________?

In a beam the local bond stress Sb, is equal to_______________?

The design of a retaining wall assumes that the retained earth________________?