The difference between gross diameter and nominal diameter for the rivets up to 25 mm diameter is__________________?

Related Mcqs:

By providing sufficient edge distance, which of the following failures of riveted joint can be avoided ?

A. tension failure of the plate B. shear failure of the rivet C. shear failure of the plate D. crushing failure of the rivet...

Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?

A. 10° to 30° B. 30° to 40° C. 40° to 70° D. 90°...

Maximum pitch of rivets, used in steel stacks, is limited to_______________?

A. 6t B. 101 C. 121 D. 161 where t is thickness of thinner plate being connected...

Lug angles_________________?

A. are used to reduce the length of connection. B. are unequal angles. C. increases shear lag. D. all the above...

The basic wind speed is specified at a height ‘h’ above mean ground level in an open terrain. The value of’h’ is__________________?

A. 10 m B. 20 m C. 25 m D. 50 m...