Search
.Management Sciences
1. to increase shrinkage
2. to decrease shrinkage
3. to increase setting time
4. to decrease setting time
The correct answer is?
A. (1) and (3)
B. (1)and(4)
C. (2)and (3)
D. (2)and (4)
Related Mcqs:
- The most commonly used admixture which prolongs the setting and hardening time is_______________?
- A. gypsum B. calcium chloride C. sodium silicate D. all of the above...
- Diagonal tension in a beam______________?
- A. is maximum at neutral axis B. decreases below the neutral axis and increases above the neutral axis C. increases below the neutral axis and decreases above the neutral axis D. remains same...
- The slab is designed as one way if the ratio of long span to short span is_____________?
- A. less than 1 B. between 1 and 1.5 C. between 1.5 and 2 D. greater than 2...
- The load factors for live load and dead load are taken respectively as_________________?
- A. 1.5 and 2.2 B. 2.2 and 1.5 C. 1.5 and 1.5 D. 2.2 and 2.2...
- In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on______________?
- A. the front face in one direction B. the front face in both directions C. the inner face in one direction D. the inner face in both directions...
Recent Comments