The co-efficient of drag and lift for an incompressible fluid depends on the_________________?

Related Mcqs:

A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit E. to deliver water at a flow rate of 0.001 m3/s? The Fanning friction factor, f is 0.0062 ?

A. 10 m B. 11 m C. 11.8 m D. 30 m...

In the complete turbulence zone (in rough pipes), the____________________?

A. Rough and smooth pipes have the same friction factor B. Laminar film covers the roughness projections C. Friction factor depends upon NRe only D. Friction factor is independent of the relative roughness...

A hydraulic accumulator comprises of__________________?

A. A storage device and a control valve B. A cylinder and a plunger C. Two pistons and two cylinders D. A storage tank and a ram pump...

As per Newton’s law of viscosity, the shear stress for a given rate of angular deformation of fluid is proportional to (where, μ = fluid viscosity) ?

A. 1/μ B. μ C. μ2 D. 1/μ2...

For the same terminal conditions and fitting size, the least friction loss is incurred in a/an ?

A. T-joint B. Union C. 45° elbow D. 90°bend...